| List
Price |
| Model |
Description |
Weight |
List
Price |
Your
Price |
|
|
Elbows - 6" radius, 80 degree bend, 4"
diameter, 16 gauge aluminized steel with black coating, one tube
damp, one hanger, and two reflector end caps with 8 clips. Consult
IOM for minimum distance from burner. Sq. dimension 15" x
15" |
7# |
$104.00 |
$46.80  |
|
|
Reflector Elbow - 80 degree, with polished, one
side bright reflector elbow (not included). Sq. dimension 27"
x 27" |
5# |
$92.00 |
$41.40
|
|
|
Wall inlet cap, 4" O.D with bird screen.
For use with outside air option. Bird screen insures open air
flow to unit. Used for 0-20 of 4" intake. |
3# |
$29.00 |
$13.05
|
|
|
4" Duravent sidewall vent kit with all items
for sidewall venting, Includes: SWD-4, WT-4, IBBV-4, DHC-4. No
vent pipe material is included. 28" long when fully assembled.
NOT APPROVED FOR 200 MBTU/H |
8# |
$131.00 |
$58.95
|
|
|
4" DWV (Drain Waste Vent) tee with screened
intakes. Mates to field supplied 4" DWV pipe for use in providing
outside combustion air to heater. Air openings provide dual sources
of combustion intake air. |
2# |
$35.00 |
$15.75
|
|
|
4" flexible Air Inlet Rubber Hose (black)
with SWV adapter affixed to AIRH. Mates to 4" DWV pipe. Replaces
AIB. 18" in length. |
2# |
$44.00 |
$19.80
|
|
|
180 degree bend (U) shaped fitting, used to
make a U-Shaped configuration. 16 gauge aluminized steel. 4"
dia. Fitting. With high temperature black coating. Also included:
1 tube clamp, 1 wire hanger, 2 reflector endcaps, and 8 clips.
Adds 14" to overall unit length, center to center 16".
Consult IOM for minimum distance from burner. |
11# |
$136.00 |
$62.20
|
|
|
Reflector "U" to cover a TF1B "U"
fitting (not included). 180 degree bend "U" reflector
for attachments to standard reflectors covering the end of a "U"
configuration. Polished, one side bright aluminum. Reflectors
cannot be rotated after installation of this accessory. |
6# |
$147.00 |
$66.15
|
|
|
Turnbuckle for sloping condensing tailpipe.
One piece required for each 10ft. tube. Designed to fit standard
"S" hook. |
.5# |
$14.00 |
$6.30
|
|
|
"Brass Knuckles." Reflector mounting
bracket that allows for mounting the reflector on specified angles.
Attaches to TP19B wire hanger. Preset bends allow for a 15, 30,
or 45 degree mounting angle. See chart below for quantity needed.
BK attaches to standard hangers. |
1# |
$16.00 |
$7.20
|
|
|
|
Twenty-four inch stainless steel flex connector
with brass fittings. Not for use with gas pressure in excess of
1/2 PSI. Both fittings are ½" pipe thread by ½"
flare thread. In most parts of the country, the use of flexible
connectors requires that DR series units be rigidly mounted. Consult
local codes for compliance. |
2# |
$92.00 |
$41.40
|
|
|
Gas cock, A.G.A Design Certified 2 PSI maximum
pressure, ½" x ½" FPT, with 1/8"
NFT side pressure tap. |
1# |
$27.00 |
$12.15
|
